Ontrak CCNA R&S + Network Virtualization Basic-Hrs
Overview
Pre-Requisites
- Basic computer literacy
- Basic PC Operating System navigation skills
- Basic Internet usage skills
- Basic IP addressing knowledge
Course Content:
CCNA – R&S is a 40 hours, instructor-led training course, that teaches learners how to install, operate, configure, and verify a basic IPv4 and IPv6 network, including configuring a LAN switch, configuring an IP router, managing network devices, and identifying basic security threats. Furthermore, this course covers how to perform basic troubleshooting steps in enterprise branch office networks, preparing learners for Cisco CCNA certification.
Course Outline:
- Building Simple Network
- Establishing Internet Connectivity
- Summary Challenge
- Building a Medium-sized Network
- Network Device Management and Security
- Summary Challenge
- Introducing IPv6
- Implement Scalable Medium-Sized Networks
- Troubleshooting Basic Connectivity
- Implementing an EIGRP-Based Solution
- Summary Challenge
- Implement a Scalable OSPF-Based Solution
- Wide-Area Networks
- Network Device Management and Security
- Summary Challenge
- Labs:
-
- Discovery Lab 1: Get Started with Cisco CLI
- Discovery Lab 2: Perform Basic Switch Configuration
- Discovery Lab 3: Observe How a Switch Operates
- Discovery Lab 4: Troubleshoot Switch Media and Port Issues
- Discovery Lab 5: Inspect TCP/IP Applications
- Discovery Lab 6: Start with Cisco Router Configuration
- Discovery Lab 7: Configure Cisco Discovery Protocol
- Discovery Lab 8: Configure Default Gateway
- Discovery Lab 9: Exploration of Packet Forwarding
- Discovery Lab 10: Configure and Verify Static Routes
- Discovery Lab 11: Configure and Verify ACLs
- Discovery Lab 12: Configure a Provider-Assigned IP Address
- Discovery Lab 13: Configure Static NAT
- Discovery Lab 14: Configure Dynamic NAT and PAT
- Discovery Lab 15: Troubleshoot NATDiscovery
- Lab 16: Configure VLAN and Trunk
- Discovery Lab 17: Troubleshoot VLANs and Trunks
- Discovery Lab 18: Configure Root Bridge and Analyze STP Topology
- Discovery Lab 19: Troubleshoot STP Issues
- Discovery Lab 20: Configure and Verify EtherChannel
- Discovery Lab 21: Configure a Router on a Stick
- Discovery Lab 22: Configure a Cisco Router as a DHCP Server
- Discovery Lab 23: Troubleshoot DHCP Issues
- Discovery Lab 24: Configure and Verify HSRP
- Discovery Lab 25: Troubleshoot HSRP
- Discovery Lab 26: Configure and Verify RIPv2
- Discovery Lab 27: Troubleshoot RIPv2
- Discovery Lab 28: Configure Basic IPv6 Connectivity
- Discovery Lab 29: Configure IPv6 Static Routes
- Discovery Lab 30: Use Troubleshooting Tools
- Discovery Lab 31: Configure and Verify IPv4 Extended Access Lists
- Discovery Lab 32: Troubleshoot IPv4 Network Connectivity
- Discovery Lab 33: Configure and Verify IPv6 Extended Access Lists
- Discovery Lab 34: Troubleshoot IPv6 Network Connectivity
- Discovery Lab 35: Enhance Security of Initial Configuration
- Discovery Lab 36: Limit Remote Access Connectivity
- Discovery Lab 37: Configure and Verify Port Security
- Discovery Lab 38: Configure and Verify NTP
- Discovery Lab 39: Configure External Authentication Using RADIUS and TACACS+
- Discovery Lab 40: Configure and Verify EIGRP
- Discovery Lab 41: Configure and Verify EIGRP for IPv6
- Discovery Lab 42: Troubleshoot EIGRP
- Discovery Lab 43: Configure and Verify Single-Area OSPF
- Discovery Lab 44: Configure and Verify Multiarea OSPF
- Discovery Lab 45: Configure and Verify OSPFv3
- Discovery Lab 46: Troubleshoot Multiarea OSPF
- Discovery Lab 47: Configure Serial Interface and PPP
- Discovery Lab 48: Configure and Verify MLP
- Discovery Lab 49: Configure and Verify PPPoE Client
- Discovery Lab 50: Configure and Verify GRE Tunnel
- Discovery Lab 51: Configure and Verify Single Homed EBGP